Problem solved! Today I replaced all the hoses again with ne...

原始 JSON

{
  "kind": 1,
  "id": "eacde22b4425438b852cb8cf0e89179d3ec5c10b209ab1b6d86eea305a0ce758",
  "pubkey": "fa90c095c6eca1fd3813beb3cfb054836cfa217d949d29a893ad20523123e2ac",
  "created_at": 1783882833,
  "tags": [
    [
      "imeta",
      "url https://blossom.primal.net/c9da233fbb1b399a8f06a13b691e2a9277a20ba49fdee22698f1856d43c84918.jpg",
      "m jpeg",
      "dim 4032.0x3024.0"
    ],
    [
      "client",
      "Primal iOS"
    ]
  ],
  "content": "Problem solved! Today I replaced all the hoses again with new ones and also made sure that the water flows through the miner without any blockages. Then I filled it back up with demineralized water and paid special attention to proper venting. I also positioned the radiator higher and lowered the miner a bit.\n\nIn the meantime, I’ve also figured out what I was doing wrong. The mistake was filling the water reservoir to the brim during operation and then tightening the top screw extra tightly as well. That effectively created a closed loop and left too little space for the heat to expand. (That’s why heating systems use expansion tanks.)\n\nI learned a lot this weekend!\n\nOne final word: Don’t mess around with electricity. I had all the electrical connections installed properly by a qualified electrician. Under the system I installed a ramp so that water can drain off immediately. In case of a malfunction - 1st thing: Power off!\n\nhttps://blossom.primal.net/c9da233fbb1b399a8f06a13b691e2a9277a20ba49fdee22698f1856d43c84918.jpg",
  "sig": "31287fcf5b9de4058533a9f8a240e1c7090a9a1c883c98a4765272f4d31b8598c4107b4332e367e9c3449d3e41c925edebc6e572f26ebc10f80c204cc280b836"
}